Price & Spec
ENQUIRIES
View Specs
Profiles and Sizes
Block
Dome
Flute
30x19mm, 40x19mm and 60x19mm profiles are not available in Australian Ash.
Species and Coatings
Please note - Timber is a natural material and colour variations are inevitable. We’ve prepared an article to help you understand how it all works - you can read it here.
For help choosing the right timber coating for your application, read our detailed guide here.
Colours are reproduced as accurately as possible, we recommend that you request product samples before final selection. Whilst our products are produced as consistently as possible, each species has their own natural variations of colour, features and characteristics. Product samples may or may not fully reflect the colour variation that will occur on the project.
Spotted Gum
Raw
Clear Oil
Clear Poly
Intergrain Ultraclear
Intergrain Light Oak
Creamy White Rubio
Whitewash Rubio
Greywash Rubio
Weathered Silver Rubio
Natural Rubio
Pale Grey Rubio
Beige Rubio
Clear Rubio
Dark Grey Rubio
Olive Rubio
Chocolate Rubio
Mid Black Rubio
American Oak
Raw
Clear Oil
Clear Poly
Intergrain Ultraclear
Intergrain Light Oak
Creamy White Rubio
Whitewash Rubio
Natural Rubio
Greywash Rubio
Weathered Silver Rubio
Pale Grey Rubio
Beige Rubio
Clear Rubio
Olive Rubio
Dark Grey Rubio
Chocolate Rubio
Mid Black Rubio
Australian Ash
Raw
Clear Oil
Clear Poly
Intergrain Ultraclear
Intergrain Light Oak
Creamy White Rubio
Whitewash Rubio
Greywash Rubio
Weathered Silver Rubio
Natural Rubio
Pale Grey Rubio
Beige Rubio
Clear Rubio
Dark Grey Rubio
Olive Rubio
Chocolate Rubio
Mid Black Rubio
Mounting Options
Standard Track
45mm wide x 25mm deep
Suitable for interior and exterior applications. Features a specially designed groove for acoustic backing.
Slim Track
25mm wide x 25mm deep
Designed for exterior applications when no acoustic backing is required. Streamlined for water drainage with a sleek look. Can also be used for interiors when no acoustic backing is required.
Curving Track
45mm wide x 17mm deep
Supplied to site flexible and used to curve around the existing form.
Note: For interior use only.
Trackless
Using Direct fix clips, battens can be mounted directly to a substate for a minimalistic look.
Split Track
35mm wide x 25mm deep
The versatile Split Track is designed to be able to fit large head masonry fixings and allow for onsite in/out tolerance.
Suspended Ceiling Track
45mm wide x 32mm deep
Only suitable for suspended ceilings. Hangers and TCR not included. Designed to snap into standard suspended ceiling systems and replaces the furring channel.
Clip types
Standard Clip
Factory fitted to Mounting Tracks.
Direct Fix Clip
For mounting battens directly to a substate.
Sliding Clip
Slides in the Mounting Track for onsite spacing adjustment.
Swivel Clip
Factory fitted to Mounting Tracks to accommodate angled battens.
Seesaw Clip
For sculptural applications where greater degrees of freedom is desired.
Timber Species Usage
All timbers recommended for exterior use are Durability Class 1 (AS 5604), ensuring peace of mind that the timber will remain durable for a minimum of 40 years.
| Timber Species | Interior Use | Exterior Use |
|---|---|---|
| Spotted Gum | Yes | Yes |
| American Oak | Yes | |
| Australian Ash | Yes |
Sustainable Timber Certification
| Timber Species | FSC® | PEFC® / Responsible Wood® |
|---|---|---|
| Spotted Gum | Not Available | On Request |
| Australian Ash | Not Available | On Request |
| American Oak | On Request | Not Available |
* FSC and PEFC timber may have longer lead times.
Download FSC Certificate DOWNLOAD PEFC CERTIFICATE
Read more about timber certification in our article ‘Why use Sustainable Timber?‘
Technical Datasheet
For more details around connection capacities, section and material properties and other engineering data download our Technical Datasheet.
Revit and DWG Files
The complete package of Revit, DWG and PDF files for Sculptform’s Click-on Battens can be downloaded below.
Acoustic Backing
Our Acoustic backing panels are Group 1 fire rated and can be incorporated into our system to not only be a great acoustic solution but also replaces the need to plaster and paint a wall or ceiling behind the battens, saving time and money. Download the data sheet here for more info.
| Available Colours | Standard Sheet Size | Thickness | Acoustic Properties |
|---|---|---|---|
| Black White |
585 x 2440mm (to suit 600mm mounting track spacing)1185 x 2440mm (to suit 1200mm mounting track spacing) |
7mm | NRC 0.4 (when using 90mm air cavity)
*To see the acoustic performance of a specific design, use our Price & Spec tool. |
Typical Wall Setup
Mounting track centres
Interior regulated environments – typically 600mm for timber battens (stud centres 600mm or less).* Exterior applications require additional load considerations such as wind load which impact on mounting track centres. Refer to our product technical datasheet and consult with your project engineer.
*The data stated within are indicative only and may not be used as Evidence of Suitability.
Typical Suspended Ceiling Setup
Mounting track centres
Dependent on batten weight and other design loads imposed on the system. Span chart below for indicative track centres for budgetary purposes only*. See Price & Spec tool for estimating the weight per square meter.
The spans above consider the rigidity of the batten member only. They do not consider project specific engineering requirements such as wind load, seismic load, and other imposed actions. It is required that a qualified engineer reviews the design prior to construction.
*The data stated within are indicative only and may not be used as Evidence of Suitability.
Span Chart
Max allowable weight per square metre (kg/m2)
| Mounting Track Centres | |||
|---|---|---|---|
| Top Cross Rail Centres | 600mm | 900mm | 1200mm |
| 600mm | 48 kg/m2 | 26 kg/m2 | 10 kg/m2 |
| 900mm | 17 kg/m2 | 19 kg/m2 | 8 kg/m2 |
| 1200mm | 12 kg/m2 | – | – |
Please note:
- The data within these span tables are indicative only, and doesn’t account for project or site specific performance requirements.
- It is recommended that you have a qualified engineer to verify the design against the Engineering Specification for the project, prior to construction.
- The capacities, material properties and core engineering assumptions behind these values are contained within the Product Technical Datasheet.
- Your Click-on Batten weight can be estimated on our Price & Spec tool.
Suspended Ceiling Services
Services which integrate into our suspended ceiling system must not exceed 3kg/m². Weights of over 3kg/m² must be self-supporting.
Learn more about how to detail integrated lighting into our Click-on Battens system in our guide here.
Curved Walls
Curved walls are simple with the Click-on Batten system due to the specially designed curving mounting track. As the track is kerfed to be easily manipulated to suit the curve, it requires support between the studs. The ply form used must be thick enough to support the track across the span and be able to accept a screw fixing, every 150mm – 200mm. Please contact us for more information on using ply forms for curved walls. Note that all loads imposed on the system should be considered in the design of the ply form used to support the track. Depending on the width of the batten used, different minimum radii can be achieved (see below).
| Batten Width | Minimum Convex Radius | Minimum Concave Radius |
|---|---|---|
| 22mm | 300mm | 400mm |
| 30mm | 300mm | 400mm |
| 40mm | 300mm | 600mm |
| 60mm | 500mm | 1200mm |
NOTE: Curved tracks are not suitable for external use due to the additional loads imposed on the system.
Please contact us for further information to find an alternative solution.
Example Specification
Use the following table as a guide when creating your specification for Sculptform Click-on Battens. The details on this page will guide you through the range of species, coatings and profile sizes we have available. Our online Price & Spec tool can also create your complete specification and provide you with pricing in minutes.
| Product Name | Sculptform Click-on Battens |
| Material | Timber – Spotted Gum |
| Batten Coating | Clear Poly |
| Batten Size (s) | 30×60, 30×30, 40x19mm |
| Sequence | 30×60, 30×30, 40×19 repeating |
| Spacing between battens | 15mm |
| Mounting Track Type | Standard |
| Mounting Track Colour | Black |
| Acoustic Backing | Black |
Batten Weights
| Species | Density |
|---|---|
| Spotted Gum | 990kg/m³ |
| Australian Ash | 660kg/m³ |
| American Oak | 705kg/m³ |
Fire Compliance
Group Rating
Untreated timber typically achieves a Group 3 rating, when assessed to AS 5637.1. Contact us for more information.
Download Reports
Combustibility
Timber is deemed combustible under AS 1530.1-1994.
If your project requires a non-combustible material please refer to our aluminium range.
BAL Rating
Each timber species achieves different BAL ratings according to AS 3959-2009 as outlined below –
| Timber Species | Bal Rating |
|---|---|
| Spotted Gum | 29 |
| Australian Ash | Not tested |
| American Oak | Not tested |
Durability
Durability is an important factor when using timber externally. Each species of timber falls into one of the following durability classes. These classes relate to above ground durability as per AS 5604: 2005.
| Timber Species | Durability Class – Life Expectancy | Usage |
|---|---|---|
| Spotted Gum | Class 1 – Greater than 40 years | Interior / Exterior |
| Australian Ash | Class 3 – 7 to 15 years | Interior Only |
| American Oak | Class 3 – 7 to 15 years | Interior Only |
Maintenance
Interior Applications
Interior timber typically does not need maintenance. It is important to regularly check timber which is exposed to UV radiation through windows etc, as this can lead to yellowing of the coating. Re-coating may be required. DO NOT use any detergents, chemicals or other abrasive substances as this can damage the coatings. For more information and how to clean and maintain interior timber, download our guide below.
Exterior Applications
The level of maintenance required on external timber largely depends on the degree of exposure, location, coating selection and desired aesthetic. Sculptform offers the following coating options factory applied as standard –
- Clear Oil (Cutek CD50 Clear Oil)
When timber is not exposed to direct sunlight (for example exterior soffits), Clear oil maintains the timbers natural colour. When timber is exposed to sunlight, using Clear Oil will allow the timber to silver unless additional pigment is used to tint the clear oil. Sculptform recommends re-coating these applications every 12-18 months.
- Enviropro Exterior Coatings
When Enviropro exterior coatings are used on timber which is not exposed to direct sunlight, it typically will not require maintenance. Sculptform still recommends annual inspections to check the integrity of the coating.
Enviropro coatings are designed to maintain timber colour and prevent silvering, even in areas which are exposed to direct sunlight and UV radiation. To keep the timber pristine, Sculptform recommends re-coating every 2-4 years. The rate of coating deterioration varies, so 6 monthly visual inspections should be carried out to identify any deterioration of the coating and areas for re-coating.
External Corners and In-fills
A) Corner In-fill
B) Mounting Track
C) Batten Clip
D) Corner Clip
E) Feature Batten
A) Feature Batten
B) Corner Clip
C) Corner In-fill Options
D) Mitred Mounting Track
Infill Sizes
In-fills are available in a range of sizes to fit any batten profile (see below). DAR (Dressed All Round)
| Batten Size | Suggested Infill size |
|---|---|
| 22x40mm Block | 40x40mm DAR |
| 40x40mm Block | 40x40mm DAR |
| 30x30mm Block | 30x30mm DAR |
| 30x19mm Block | 19x19mm DAR |
| 60x19mm Block | 19x19mm DAR |
| 30x60mm Block | 60x60mm DAR (interior applications only) |
| 30x30mm Flute | 30x30mm DAR |
| 40x30mm Dome | 30x30mm Dome |
| 60x30mm Dome | 30x30mm Dome |
Length Options
Random Lengths
Random Length is the most common form of timber supply. It typically is a length spread from 1.2m – 3.6m with an average of 2.4m. It is generally the most cost-effective way of procuring timber. Random length is what is supplied unless specified otherwise. All battens are supplied end-matched and must span across two clips. Battens are joined with our Sculptform Batten Joiner.
Set Lengths
Set length is used where a quantity of the same lengths are required for your project. Sculptform can offer set lengths between 1.2m and 3.6m. Set lengths are always supplied slightly over length to allow for onsite trimming.
Exact Length
Cut to exact length is similar to the ‘Set Length’ option, but with trimming to an accuracy of ±1mm. Accurate onsite measure required to prevent issues with uneven walls and ceilings.
Access Panels
Pivot Hatch
Pivot hatches are supplied as a kit and assembled on site. Please consider:
- Clearance is required for upward movement. Allow 200mm clearance above the panel
- Typically 1-3mm gap in the batten ends
- Length options available are 600mm and 1200mm.
- Battens can be cut to any width on site up to 1200mm. Beyond 1200mm, consult Sculptform directly.
Drop-in Hatch
The drop-in hatch is the simplest solution to providing access. Please consider:
- This hatch type is built on site at the locations required.
- Drop-in hatches can be built any size up to 1200x1200mm.
- Stainless spring is removed on last clip.
Integrated Lighting
The flexibility of the Click-on battens system allows lighting to be integrated quickly and easily. Detailing examples in PDF and DWG formats for the following lighting options are available in our guide – How to detail integrated lighting.
- Down and can lights
- Inlaid lights
- Linear lights
- Cove lights
End Junction Options
Angle Bracket
A) Feature batten
B) Mounting track
To be checked out to accommodate angle
C) 25 x 40 x 3mm aluminium angle
Finish can be powder coated or anodised to your preference
D) Wall substrate
DAR Endstop
A) Feature batten
B) Mounting track
C) Custom timber endstop
D) Wall substrate
End matching
 |
 |
Batten Joiner
Where timber battens are supplied random length and need to be joined off a clip, the batten joiner needs to be used. This accessory is designed to be used in conjunction with end matching to provide strong joins between battens off a clip.
Mounting Track Joiner
The Mounting Track Joiner is used to align the tracks at end-to-end joins and uses a simple push-fit connection. This joiner is only used with Ceiling Mounting Track.
Base Detail
For vertical batten applications, the method shown in this detail will prevent slippage.
Anti-slip Detail
Where the aluminium base angle is not being used, it is recommended that a small screw be inserted into the back of the batten to serve as an anti-slip measure.
Maximum Cantilever
The last mounting track should be no more than 100mm from the end of the battens when spacing between the battens is under 20mm. For sequences with spacing over 20mm, a maximum cantilever of 300mm is acceptable when using timber battens.
Batten Removal and Replacement
A feature of the Click-on battens system is the ability to quickly and easily remove any batten on a wall or ceiling using a specially designed tool provided by Sculptform. The batten removability feature is designed to be used to replace damaged battens or to allow emergency access behind the battens. If access is required on a regular basis, Sculptform recommends our access hatch solution.
If batten removability is a requirement, please consider the following:
- To allow for batten removability on suspended ceilings, battens must be joined on a clip without the use of the batten joiner.
- Battens can only be removed on sequences which have at least 5mm spacing between battens.
- The removal tool is designed to apply pressure to the inside of the track and will not leave any visible marks.
For full instructions on our removal tool, download our manual below.